gmc Workshop Repair Guides

GMC Yukon/Denali 2WD V8-60L VIN U Workshop Service & Auto Repair Manuals

Procedures|Page 13408 > < Procedures|Page 13406
Page 1
background image

Luggage Rack: Removal and Replacement

Luggage Carrier Replacement (All Except Z-71)

Luggage Carrier Replacement (All Except Z-71)

Removal Procedure

1. Remove the rear pad covers.
2. Remove the cross rails by releasing the lever on both sides and sliding toward rear of vehicle.
3. Remove the side rail attaching bolts.
4. Remove the side rail(s).

Installation Procedure

1. Install the side rail(s).

Notice:  Refer to Fastener Notice in Service Precautions.

2. Install the side rail attaching bolts.

Tighten the bolts 4 N.m (35 lb in).

3. Install the cross rails by sliding toward front of vehicle and engaging lever on both sides.
4. Install the rear pad covers by snapping into place.

Luggage Carrier Replacement (Z-71)

Luggage Carrier Replacement (Z-71)

Removal Procedure

1. Remove the 2 inboard fasteners from the luggage carrier base covers.
2. Remove the base covers.
3. Remove the fasteners from the front bases.

Procedures|Page 13408 > < Procedures|Page 13406