Yukon/Denali 2WD V8-6.0L VIN U (2004)
1. Position the right engine mount to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the engine mount-to-engine mount bracket bolts.
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
6. Install the exhaust manifold. Refer to Exhaust Manifold Replacement - Right (4.8L, 5.3L, and 6.0L Engines) or Exhaust Manifold Replacement -
Right (8.1L Engine) in Engine Exhaust.
7. Install the inner wheelhouse panel. Refer to Refer to Wheelhouse Panel Replacement.
8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
9. Install the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement.
10. Lower the vehicle.
