Yukon/Denali 2WD V8-6.0L VIN U (2004)
Power Steering Pump: Service and Repair
Power Steering Pulley
Power Steering Pulley Replacement
^
Tools Required
-
J 25034-C Power Steering Pump Pulley Remover
-
J 25033-C Power Steering Pump Pulley Installer
Removal Procedure
1. Remove the upper fan shroud.
2. Remove the drive belt.
3. Remove the power steering pump pulley using the J 25034-C.
Installation Procedure
1. Place the power steering pump pulley on the end of the power steering pump shaft.
2. Install the power steering pump pulley using J 25033-C.