Yukon/Denali 2WD V8-6.0L VIN U (2004)
Band Apply Servo: Service and Repair
Automatic Transmission - 4L60-E/4L65-E
2-4 Servo
^
Tools Required
-
J 29714-A Servo Cover Depressor
Removal Procedure
1. Remove the exhaust pipe.
2. Remove the heat shield bolts.
3. Remove the heat shield.
4. Remove the oil pan bolt below the servo.
5. Install the J29714-A.
6. Tighten the bolt on J 29714-A in order to compress the servo cover.
