Yukon/Denali 2WD V8-6.0L VIN U (2004)
8. Remove the inner pinion bearing from the pinion using the J22912-01 and a hydraulic press.
9. Remove the outer pinion bearing cup using a hammer and a brass drift in the slots provided.
Move the drift back and forth between one side of the cup and the other in order to work the c ups out of the retainer evenly.
10. Remove the inner pinion bearing cup using a hammer and a brass drift in the slots provided.
Move the drift back and forth between one side of the cup and the other in order to work the cups out of the retainer evenly.
