Yukon/Denali 4WD V8-4.8L VIN V (2005)
Front Bumper Cover / Fascia: Service and Repair
Air Deflector Replacement - Front Bumper Fascia
Air Deflector Replacement - Front Bumper Fascia
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the fog lamp electrical connectors, if equipped.
3. Remove the fog lamps, if equipped.
4. Loosen the center studs of the push-pins on the air deflector with a flat-bladed screwdriver.
5. Remove the air deflector from the front bumper fascia.
Installation Procedure
1. Position the air deflector onto the front bumper assembly.
2. Fasten the connection ends of the push-pins onto the front bumper deflector.
3. Install the fog lamps, if equipped.
4. Connect the fog lamp electrical connectors, if equipped.
5. Lower the vehicle.