Yukon/Denali 4WD V8-4.8L VIN V (2005)
Important: Prior to refinishing, refer to GM 4901MD-99 Refinish Manual for recommended products. Do not combine paint systems.
Refer to paint manufacturer's recommendations.
2. Apply an approved anti-corrosion primer.
3. Apply full-body caulk to the entire hinge mounting surface.
4. Position the service hinge within the scribe marks on the pillar.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the hinge fasteners.
Tighten the bolts to 25 N.m (18 lb ft).
6. Refinish the metal surfaces as necessary.
7. Align and install all of the related panels and the components.
