gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Body/Steering - Clunk Noise When Turning|Page 14086 > < Body/Steering - Clunk Noise When Turning|Page 14084
Page 2
background image

For vehicles repaired under warranty, use the table.

Disclaimer

Technical Service Bulletin # 05-02-35-003B

Date: 060127

Body/Steering - Clunk Noise When Turning

Bulletin No.: 05-02-35-003B

Date: January 27, 2006

TECHNICAL

Subject:
EI05061 - Intermediate Steering Shaft Clunk Noise or Stick-Slip (Follow Strategy Based Diagnostics)

Models:
2005-2006 Cadillac Escalade, Escalade ESV, Escalade EXT
2005-2006 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2005-2006 GMC Sierra, Yukon, Yukon XL

Supercede:

This bulletin is being revised to update the diagnostic information. Please discard Corporate Bulletin Number 05-02-35-003A (Section 02 - Steering).

Condition

Some customers may comment on a "clunk" noise coming from the front of the vehicle.

Correction

Information has shown that the noise may be caused by the following three areas (listed in no particular order). Many of these concerns may initially be
mis-diagnosed as an I-shaft clunk.

^

Body mount at the A-pillar - this noise may be heard mostly during a driving situation in which the body is twisted/flexed (i.e. hitting a pot-hole).

^

Frame - this noise may be heard at the torsion bar crossmember during a turning maneuver.

^

I-Shaft - this noise may be heard when turning at low speeds on rough road surfaces.

Body/Steering - Clunk Noise When Turning|Page 14086 > < Body/Steering - Clunk Noise When Turning|Page 14084