Yukon/Denali 4WD V8-4.8L VIN V (2005)
Arm Rest: Customer Interest
Interior - Front Seat Arm Rest Hinge Broken
Bulletin No.: 06-08-50-004A
Date: July 28, 2006
TECHNICAL
Subject:
Front Seat Armrest Hinge Breaking (Replace Lid)
Models:
2003-2006 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2003-2006 GMC Sierra, Yukon, Yukon XL
with Front Split Seat (RPO AE7)
Supercede:
This bulletin is being revised to include RPO Code and interior trim color code information. Please discard Corporate Bulletin Number 06-08-50-004
(Section 08 - Body and Accessories).
Condition
Some customers may comment that the lid for the armrest is broken.
Correction
Replace the armrest lid using the procedure below.
1.
Open the armrest lid.
2.
Remove the armrest inner panel. Use a flat-bladed screwdriver and place it between the two panels and pull to separate.
3.
Fold the seat backs to gain access to the hinge pin. Using a punch, push the hinge pin out.
4.
Install the two springs into the new armrest lid.
5.
Align the two springs and the lid to the armrest and install the pin.
6.
Install the inner lid to the armrest and close the lid.
7.
Place the seat back in the upright position.
