Yukon/Denali 4WD V8-4.8L VIN V (2005)
7. Install the 2 retaining screws.
Tighten the screws to 1.6 N.m (14 lb in).
8. Install the rear cupholder to the end panel.
9. Install the storage bin.
Clock Replacement - Console
CLOCK REPLACEMENT - CONSOLE
REMOVAL PROCEDURE
1. Remove the console upper bezel.
2. From the back of the bezel remove the retaining screws.
3. Remove the clock from the bezel.
INSTALLATION PROCEDURE
1. Install the clock to the bezel.
2. Install the retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the retaining screws to 2 N.m (17 lb in).
3. Install the bezel to the console.
Console Replacement (w/Console Mounting Bracket)