Yukon/Denali 4WD V8-4.8L VIN V (2005)
Drink Holders: Procedures
Blower Replacement - Cupholder - Front Floor Console
BLOWER REPLACEMENT - CUPHOLDER - FRONT FLOOR CONSOLE
REMOVAL PROCEDURE
1. Remove the console cup holder assembly.
2. Remove the 2 retaining screws.
3. Slide the blower assembly upwards.
4. Insert a small flat-bladed tool to release the tab (2) that secures the connector in place.
5. Remove the blower from the cupholder assembly.
INSTALLATION PROCEDURE
