Yukon/Denali 4WD V8-4.8L VIN V (2005)
6. Remove the quarter panel trim from the vehicle.
Lift the quarter panel to release the quarter panel from the vehicle.
Installation Procedure
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the garnish molding.
5. Install the Third Pillar trim panel.
6. Install the rear seat.
Trim Replacement - Third Pillar
TRIM REPLACEMENT - THIRD PILLAR
REMOVAL PROCEDURE
1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt cover and bolt.
3. Remove the trim panel from the vehicle.
INSTALLATION PROCEDURE
