Yukon/Denali 4WD V8-4.8L VIN V (2005)
1. Position the blower (3) to the bracket (1).
2. Install rivets (2) to secure the blower to the bracket.
3. Align the blower and bracket assembly to the seat cushion frame.
4. Secure the bracket to the frame using tie straps in the same position they were removed.
5. Connect the blower electrical connector.
6. Install the seat cushion.
Blower Replacement - Ventilation Heat and Cool - Rear Seat Cushion
BLOWER REPLACEMENT - VENTILATION HEAT AND COOL - REAR SEAT CUSHION
REMOVAL PROCEDURE
