Yukon/Denali 4WD V8-4.8L VIN V (2005)
3. Remove the caliper from the mounting bracket and support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the
hydraulic brake flexible hose from the caliper. Refer to Brake Caliper Replacement - Front.
4. Remove the disc brake pads from the disc brake caliper mounting bracket.
5. Remove the disc brake pad retainers from the disc brake caliper mounting bracket.
6. Inspect the disc brake hardware. Refer to Disc Brake Mounting and Hardware Inspection - Front.
7. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket (3).
Installation Procedure
1. Lubricate the front brake caliper bushings, bolts and seals with high temperature silicone brake lubricant.
2. Install the caliper pin boots (4) to the disc brake caliper mounting bracket (3).
3. Install the disc brake pad retainers to the disc brake caliper mounting bracket.
4. Install the disc brake pads to the disc brake caliper mounting bracket.
