Yukon/Denali 4WD V8-4.8L VIN V (2005)
1. Install the cable taking care to correctly route the cable through the guides and the body mounts.
2. Install the cable to the backing plate by pressing the cable into place until locking tabs snap into place (15 series).
3. Install the cable to the lever.
4. Install the cable taking care to correctly route the cable through the guides and the body mounts.
5. Install the cable to the backing plate by pressing the cable into place until locking tabs snap into place (25 series).
6. Install the cable to the lever.
7. Install the cable at the shock absorber bracket and install the bolt.
^
Tighten the bolt to 25 N.m (18 lb ft).
Notice: Refer to Fastener Notice.
8. Install the cable to the mounting bracket until the locking tabs snap into place.