Yukon/Denali 4WD V8-4.8L VIN V (2005)
9. If vehicle is a 1500 series with the second design or a 2500 series, install the park brake cable to the equalizer bar by pulling down on the cable in
front of the equalizer and installing the cable to the equalizer bar.
10. If vehicle is a 1500 series with the first design cable, perform the following:
1. Install the park brake cable through the frame bracket and guides.
2. Install the left rear park brake cable (3) from the equalizer bar.
11. Remove the safety stands.
12. Lower the vehicle.
13. Adjust the park brake cable. Refer to Park Brake Adjustment.
(With RPO Nys)
Park Brake Cable Replacement - Left Rear (with RPO NYS)
Removal Procedure
