Yukon/Denali 4WD V8-4.8L VIN V (2005)
Parking Brake Warning Switch: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.
2. Remove the MID-bussed electrical center from the bracket.
3. Remove the park brake warning lamp switch electrical connector.
4. Remove the park brake warning lamp switch mounting bolt.
5. Remove the park brake warning lamp switch.
Installation Procedure
