Yukon/Denali 4WD V8-4.8L VIN V (2005)
Engine Mount: Service and Repair
Engine Mount Bracket Replacement - Left
Engine Mount Bracket Replacement - Left
Removal Procedure
1. Remove the engine mount. Refer to Engine Mount Replacement - Left.
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.
Installation Procedure
1. Install the engine mount bracket.
2. Perform the following procedure prior to installing the engine mount bracket bolts.
^
Remove all traces of the original adhesive patch.
^
Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
^
Apply threadlocker GM P/N 12345382 ( Canadian P/N 10953489) or equivalent to the bolts.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine mount bracket bolts.
^
Tighten the engine mount bracket bolts to 75 Nm (55 ft. lbs.).
4. Install the engine mount. Refer to Engine Mount Replacement - Left.
