Yukon/Denali 4WD V8-4.8L VIN V (2005)
Headlamp Alignment Switch: Service and Repair
HEADLAMP LEVELING SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel bezel.
2. Pull out the accessary switch housing.
3. Disconnect the electrical connectors.
4. Remove the head lamp leveling switch from the accessary switch housing.
INSTALLATION PROCEDURE
1. Install the head lamp leveling switch into accessary switch housing.
2. Connect the electrical connectors.
3. Install the accessary switch housing.
4. Install the instrument panel bezel.
