gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Electrical - A/T Stuck in 2nd/3rd Gear/MIL ON/DTC's|Page 4969 > < Electrical - A/T Stuck in 2nd/3rd Gear/MIL ON/DTC's|Page 4967
Page 1
background image

Air Filter Element: Service and Repair

AIR CLEANER ELEMENT REPLACEMENT

REMOVAL PROCEDURE

1. Remove the air cleaner outlet duct.
2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (4).

3. Loosen the air cleaner housing top screws.
4. Remove the air cleaner housing cover.
5. Remove the air filter element.

INSTALLATION PROCEDURE

1. Install a NEW air filter element.
2. Install the air cleaner housing cover.
3. Tighten the air cleaner housing top screws until snug.

Electrical - A/T Stuck in 2nd/3rd Gear/MIL ON/DTC's|Page 4969 > < Electrical - A/T Stuck in 2nd/3rd Gear/MIL ON/DTC's|Page 4967