Yukon/Denali 4WD V8-4.8L VIN V (2005)
Seat Belt Buckle: Service and Repair
Rear
SEAT BELT BUCKLE REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear seat cushion and cover.
2. Remove the bolt (13) that retains the buckle assembly (14) to the seat frame.
3. Remove the buckle assembly.
INSTALLATION PROCEDURE
1. Install the buckle assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt (13) that retains the buckle assembly (14) to the seat frame.
Tighten the bolts to 53 N.m (39 lb ft).
3. Install the rear sear cushion and cover.
