Yukon/Denali 4WD V8-4.8L VIN V (2005)
Cabin Temperature Sensor / Switch: Service and Repair
Inside Air Temperature Sensor Assembly - Auxiliary
INSIDE AIR TEMPERATURE SENSOR ASSEMBLY REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the third pillar molding.
2. Remove the left rear coat hook, if equipped.
3. Remove the rear headliner retainers from the front headliner.
4. Carefully lower the headliner from the roof Velcro retainers.
5. Disconnect the electrical connector from the inside air temperature sensor.
6. Partially remove the auxiliary inside air temperature sensor from the headliner.
7. Remove the sensor grille from the auxiliary inside air temperature sensor.
8. Remove the auxiliary inside air temperature sensor from the headliner.
INSTALLATION PROCEDURE
1. Install the new sensor grille to the headliner.
2. Install the inside air temperature sensor to the headliner and sensor grille.
3. Connect the electrical connector to the inside air temperature sensor.
4. Secure the headliner to the roof Velcro.
5. Install the rear headliner retainers to the front headliner.
6. Install the left rear coat hook, if equipped.
