Yukon/Denali 4WD V8-4.8L VIN V (2005)
Alignment: Service and Repair
Front Toe Adjustment
Front Toe Adjustment
1. Loosen the jam nut on the tie rod (2).
2. Rotate the inner tie rod (1) to the required toe specification setting.
3. Tighten the jam nut on the tie rod.
^
Tighten the tie rod jam to 68 Nm (50 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
