Yukon/Denali 4WD V8-4.8L VIN V (2005)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
1. Loosen the jam nut on the tie rod (1).
2. Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications.
3. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the jam nut on the tie rod.
^
Tighten the tie rod jam to 65 Nm (48 ft. lbs.).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
