Yukon/Denali 4WD V8-4.8L VIN V (2005)
Installation Procedure
1. Install the steering knuckle (2) to the vehicle.
2. Install the upper ball joint.
3. Install the lower ball joint.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the park brake cable retaining bolt (3) to the steering knuckle.
^
Tighten the bolt to 65 Nm (48 ft. lbs.).
5. Install the wheel hub and bearing.
6. Install the outer tie rod retaining nut to the steering knuckle.
^
Tighten the nut to 55 Nm (40 ft. lbs.).
7. Install the outer tie rod retaining bracket (2).
^
Tighten the bracket to 65 Nm (48 ft. lbs.).
8. Install the tire and wheel.
9. Lower the vehicle.
10. Perform a four wheel alignment.
