Yukon/Denali 4WD V8-4.8L VIN V (2005)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement (4.8L, 5.3L and 6.0L)
Removal Procedure
1. Remove the power steering pulley.
2. Raise the vehicle.
3. Remove the oil pan skid plate bolts.
4. Remove the oil pan skid plate from the vehicle, if equipped.
5. Place a drain pan under the vehicle.
6. Remove the power steering pressure hose (2) from the power steering pump from underneath the vehicle.
7. Lower the vehicle.
