Yukon/Denali 4WD V8-4.8L VIN V (2005)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the bracket (3) to the rear of the pump (1).
^
Tighten the rear bracket retaining nuts to 50 Nm (37 ft. lbs.).
2. Install the power steering pump.
3. Install the bolt retaining the rear bracket to the engine.
^
Tighten the rear power steering bracket bolt to engine bracket to 50 Nm (37 ft. lbs.).
4. Install the bolts to the front of the pump.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the power steering pump return hoses (2,4) to the power steering pump and install the retaining clamps.