Yukon/Denali 4WD V8-4.8L VIN V (2005)
10. Remove the wheel hub and bearing (1) from the vehicle.
Installation Procedure
1. Install the wheel hub and bearing (3) to the vehicle.
2. Install the wheel hub and bearing retaining bolts.
^
Tighten the bolts to 140 Nm (103 ft. lbs.).
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the wheel drive shaft retaining nut.
^
Tighten the nut to 250 Nm (184 ft. lbs.).
4. Install the retainer (3) and cotter pin (2) to the wheel drive shaft nut.
5. Install the dust cap (4).
6. Install the outer tie rod to the steering knuckle.
7. Install the brake rotor.
8. Install the tire and wheel.
