Yukon/Denali 4WD V8-4.8L VIN V (2005)
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove the engine protection shield.
6. Remove the transmission fluid cooler hoses from the transmission.
7. Remove the transmission fluid cooler hoses from the retainer on the engine.
8. Remove the transmission fluid cooler hoses from the vehicle.
Installation Procedure
1. Install the transmission fluid cooler hoses to the vehicle.
2. Install the transmission fluid cooler hoses to the transmission.
3. Install the transmission fluid cooler hoses to the retainer on the engine.
4. Install the engine protection shield.
5. Lower the vehicle.
6. Install the transmission fluid cooler hose to the radiator.
