Yukon/Denali 4WD V8-4.8L VIN V (2005)
4. Remove the plugs from the transmission oil cooler line fittings.
5. Connect the transmission oil cooler lines.
6. Install the exhaust pipe hanger bracket and bolts.
^
Tighten the bolts to 17 Nm (12 ft. lbs.).
7. Instal the insulator and nuts to the bracket.
^
Tighten the nuts to 17 Nm (12 ft. lbs.).
8. Tighten the right exhaust pipe nuts.
^
Tighten the nuts to 50 Nm (37 ft. lbs.).
9. Tighten the left exhaust pipe nuts.
^
Tighten the nuts to 50 Nm (37 ft. lbs.).
