Yukon/Denali 4WD V8-4.8L VIN V (2005)
6. Install the clips on the cable to the floor panel reinforcement.
7. Lower the vehicle.
8. Install the cable grommet to the floor panel.
9. Important: Avoid unnecessary twisting/bending of the range selector cable when installing the cable to the support.
Install the range selector cable to the support.
10. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolt securing the cable support to the brace.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
