Yukon/Denali 4WD V8-4.8L VIN V (2005)
7. Install the new axle shaft seal using the J 45225 (1) and the J 8092 (2).
8. Install the inner axle shaft into the differential case side gear using a soft-faced mallet until the retaining ring on the inner axle shaft is fully seated
within the groove in the differential case side gear.
9. Pull back on the inner axle shaft to ensure that the inner axle shaft is properly retained in the differential case side gear.
10. Install the front differential carrier assembly.
11. Fill the differential carrier assembly. Use the correct fluid.
12. Lower the vehicle.
