Yukon/Denali 4WD V8-5.3L VIN T (2004)
1. Install the cup holder by pushing inwards till the clips (1) click in place.
2. Ensure around the corners of the cup holder is seated properly.
Cupholder Replacement (Platinum)
CUPHOLDER REPLACEMENT (PLATINUM)
REMOVAL PROCEDURE
1. Remove the console bezel assembly.
2. Remove the blower assembly.
3. Remove the four retaining screws.
4. Remove the plastic cover that the blower assembly slides into.
5. Slide the heat/cool unit from the front of the cup holder assembly.
INSTALLATION PROCEDURE
