Yukon/Denali 4WD V8-5.3L VIN T (2004)
4.
Loosen the three engine mount to bracket bolts (1).
5.
Raise the vehicle.
6.
Loosen the two bracket to frame bolts (1).
7.
Lift up the engine with an adjustable jack stand to relieve the load on the mount/bracket.
8.
Rotate the bracket as far outboard as possible.
9.
Lower the engine and remove the jack stand.
10.
Re-tighten the two bracket to frame bolts.
11.
Lower the vehicle.
12.
Re-tighten the three engine mount to bracket bolts.
13.
Repeat the above steps for the other mount, if necessary.
Warranty Information