gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Evaporative Emission (EVAP) System Hoses/Pipes Replacement|Page 4662 > < Evaporative Emission (EVAP) System Hoses/Pipes Replacement|Page 4660

Yukon/Denali 4WD V8-5.3L VIN T (2004)

Page 2
background image

1. Remove the caps from the EVAP canister purge solenoid and the EVAP chassis pipe.
2. Install the EVAP tube.
3. Connect the EVAP tube to the EVAP chassis pipe (2).
4. Connect the EVAP tube to the EVAP canister purge solenoid (1).
5. Install the engine sight shield.

Evaporative Emission (EVAP) System Hoses/Pipes Replacement|Page 4662 > < Evaporative Emission (EVAP) System Hoses/Pipes Replacement|Page 4660