Yukon/Denali 4WD V8-5.3L VIN T (2004)
4. Install the bracket (7) to the axle.
5. Install the bolt (8) and nut (2) retaining the bracket to the axle.
^
Tighten the bolt and nut to 25 Nm (18 ft. lbs.).
6. Install the bolt (4) retaining the brake hose bracket (3) to the axle.
^
Tighten the brake hose bracket retaining bolt to 12 Nm (106 inch lbs.).
7. Install the tire and wheel.
8. Lower the vehicle.
9. Perform a four wheel alignment.
Lower
Lower Ball Joint Replacement
Removal Procedure
Notice: Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.
1. Raise the vehicle.
2. Remove the tire and wheel.
3. Remove the bolt (8) and nut (2) retaining the bracket to gain access to the pinch bolt.
