Yukon/Denali 4WD V8-5.3L VIN T (2004)
3. Remove the rear axle drain plug.
4. Drain the lubricant into a suitable container.
5. Inspect the drain plug for excessive metal particle accumulation. This accumulation is symptomatic of extreme wear.
6. Clean the drain plug.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the rear axle drain plug
^
Tighten the rear axle drain plug to 33 Nm (24 ft. lbs.).
2. Fill the rear axle. Use the proper fluid.
3. Install the rear axle fill plug.
