Yukon/Denali 4WD V8-5.3L VIN T (2004)
Important: When removing the axle shaft do not rotate the shaft. Rotating the shaft will cause the gears to move. Misalignment of the gears will
make the assembly difficult.
7. Remove the axle shaft.
Installation Procedure
1. Install the axle shaft.
2. Install the spring loaded lock clip to the axle shaft end.
3. Install the steering knuckle assembly.
4. Install the rear steering gear assembly.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
Rear Axle Shaft and/or Gasket Replacement
Rear Axle Shaft and/or Gasket Replacement
Removal Procedure
