Yukon/Denali 4WD V8-5.3L VIN T (2004)
Seals and Gaskets: Service and Repair
Rear Drive Axle
Rear Axle Shaft Seal Replacement- Outer
Rear Axle Shaft Seal Replacement- Outer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the tire and wheel assembly.
3. Remove the axle shaft.
4. Remove the axle shaft seal.
Installation Procedure
1. Install the axle shaft seal.
2. Install the axle shaft.
3. Install the tire and wheel assembly.
4. Lower the vehicle.
Rear Axle Shaft Seal Replacement - Inner
Rear Axle Shaft Seal Replacement - Inner
^
Tools Required
-
J 33049 Camshaft Bearing Service Set
-
J 45177 Differential Seal Installer - Inner
Removal Procedure