Yukon/Denali 4WD V8-5.3L VIN T (2004)
Fluid - Transfer Case: Service and Repair
Transfer Case - NVG 246-NP8
Transfer Case Fluid Replacement
Removal Procedure
Important: When performing the following procedures, use only hand tools to remove and install the drain and fill plugs.
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the transfer case shield, if equipped.
3. Remove the fill plug.
4. Remove the drain plug.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
