Yukon/Denali 4WD V8-5.3L VIN T (2004)
1. Install the speed sensor with a NEW O-ring seal.
^
Tighten the sensor to 17 Nm (13 ft. lbs.).
2. Connect the speed sensor electrical connector (1).
3. Install the transfer case shield, if equipped.
1. Install the speed sensor with a NEW O-ring seal.
^
Tighten the sensor to 17 Nm (13 ft. lbs.).
2. Connect the speed sensor electrical connector (1).
3. Install the transfer case shield, if equipped.