Yukon/Denali 4WD V8-6.0L VIN U (2004)
16. If equipped with a 8.1L engine, install the negative cable clip to the positive cable clip.
17. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the negative cable clip to the positive cable clip.
18. Install the positive battery cable (1) into the junction block.
19. Snap the junction block cover closed.
20. If necessary, install the engine sight shield.
21. Tighten the positive cable bolt at the UBEC.
Tighten the bolt to 9 N.m (80 lb in).
