Yukon/Denali 4WD V8-6.0L VIN U (2004)
6. Raise the vehicle.
7. Install the power steering pressure hose (2) to the power steering pump.
^
Tighten the fitting to 28 Nm (20 ft. lbs.).
8. Install the oil pan skid plate. if equipped.
9. Install the oil pan skid plate bolts.
^
Tighten the retaining bolts to 20 Nm (15 ft. lbs.).
10. Lower the vehicle.
11. Install the intermediate shaft.
12. Install the power steering pulley.
13. Fill and bleed the power steering system.
