Yukon/Denali 4WD V8-6.0L VIN U (2004)
Notice: Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.
1. Raise the vehicle.
2. Remove the tire and wheel.
3. Remove the tie rod bracket (2) retaining bolts (1) from the steering knuckle.
4. Loosen the tie rod jam nut (1).
5. Remove the nut retaining the outer tie rod end to the steering knuckle.
6. Using the J24319-B (1), remove the outer tie rod end from the steering knuckle.
7. Remove the outer tie rod end from the inner tie rod.
Installation Procedure
