Yukon/Denali 4WD V8-6.0L VIN U (2004)
Shift Cable: Service and Repair
Automatic Transmission - 4L80-E/4L85-E
Automatic Transmission Range Selector Cable Replacement
Automatic Transmission Range Selector Cable Replacement
Removal Procedure
1. Position the steering column shift lever to the park position.
2. Remove the instrument panel knee bolster. Refer to Knee Bolster Replacement in Instrument Panel,Gauges and Warning Indicators.
3. Remove the driver's seat. Refer to Seat Replacement - Front Bucket in Seats.
4. Pull back the carpet and insulation around the driver's area.
5. Remove the retainer securing the cable to the steering column.
6. Remove the cable end from the steering column ball stud.
7. Depress the tangs and remove the cable from the steering column bracket.
