Yukon/Denali 4WD V8-6.0L VIN U (2004)
3. Install the wiper transmission assembly on the vehicle with the 2 bolts.
Tighten the 2 bolts to 9 N.m (80 lb in).
4. Connect the electrical connector to the wiper motor.
5. Install the reinforcement panel with the 4 bolts.
Tighten the 4 bolts to 9 N.m (80 lb in).
6. Install the air inlet grille panel.
7. Install the wiper arms.
8. Operate the wipers and check for proper operation.
