Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
1. Press in the speaker (1) until it is fully seated.
2. Connect the electrical connector (3).
3. Install the windshield garnish molding (2).
Front Door
SPEAKER REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the speaker by pushing down on the top retainer.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the speaker.Push the speaker into place. Ensure that the speaker is completely seated.
3. Install the trim panel.
4. Inspect the component operation.
Rear Pillar
SPEAKER REPLACEMENT - REAR PILLAR
REMOVAL PROCEDURE
1. Remove the garnish molding.
