gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Trunk / Liftgate Weatherstrip > < Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)|Page 12406
Page 1
background image

Trunk / Liftgate Striker: Service and Repair

Lock Striker Replacement - Endgate (Tahoe/Yukon)

Removal Procedure

1. Remove the lower striker bolt.
2. Remove the striker.

Installation Procedure

Notice:  Refer to Fastener Notice in Service Precautions.

1. Install the striker.

Tighten the bolts to 22 N.m (16 lb ft).

2. Install the trim panel.

Trunk / Liftgate Weatherstrip > < Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)|Page 12406