Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
7. Install the 2 retaining screws.
Tighten the screws to 1.6 N.m (14 lb in).
8. Install the rear cupholder to the end panel.
9. Install the storage bin.
Clock Replacement - Console
CLOCK REPLACEMENT - CONSOLE
REMOVAL PROCEDURE
1. Remove the console upper bezel.
2. From the back of the bezel remove the retaining screws.
3. Remove the clock from the bezel.
INSTALLATION PROCEDURE
1. Install the clock to the bezel.
2. Install the retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.