Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
Refer to the Service Parts ID Label to identify the type of top coat on the vehicle. This label contains all paint related information for the vehicle. This
includes paint technology, paint codes, trim level, and any special order paint colors.
Parts ID Label Location
The vehicle service parts identification label is located inside the instrument panel I/P compartment. The label is used to help identify the vehicle
original parts and options.
Paint Identification
Paint Identification
Caution: Exposure to isocyanates during paint preparation and application processes can cause severe breathing problems. Read and follow
all of the instructions from the manufacturers of painting materials, equipment, and protective gear.
Important: Always refer to the GM Approved Refinish Materials book GM P/N 4901M-D. This book identifies the paint systems you may use.
The basecoat/clearcoat paint is factory applied in the following 4 layers in order to give the finish a high gloss look:
*
A cathodic immersion primer
*
A primer/surfacer
*
A basecoat
*
A clear top coat (clearcoat)
Refer to Label - Service Parts ID in order to identify the type of top coat on the vehicle. This label contains all paint related information for the vehicle.
This includes paint technology, paint codes, trim level, and any special order paint colors.
